Step 1 – Shake out the excess dust:

A light diffuser panel is fabricated from simple nylon, which makes it a perfect trap for dust and debris. A simple shake will knock off a large portion of this dust and make your life much easier.

Step 2 – Blow out stubborn particles:

For this step, you will need a small fan with a low-power setting. Simply turn your fan on and hold the nylon panel near it. The fan will push air through the mesh panel and clear much of the debris away. You can power your fan up in increments if you are dealing with stubborn dust particles, but always start small and work your way up.

Step 3 – Apply mild cleaning solutions:

Often warm water will suffice, but if not, seek out a very mild cleaning solution to use. Once you have mixed your solution or prepared your warm water bath, submerge the panel and allow it to soak for a few minutes. Do not scrub the panel, as you will end up damaging the fragile nylon. After a few minutes have elapsed, remove the panel and allow it to air-dry. At this point, you are all done – put your panel back in place, and let there be light!